Bar stock - iglidur®
Wear problems are solved quickly and cost-effectively with a large selection of bar stock products from igus®. They are long-lasting and their shape can be adapted individually. Plastic bar stock products made of iglidur® material do not need any additional lubrication and are maintenance-free. They have been specially developed for dynamic applications, have low coefficients of friction and are very hard-wearing. This substantially lengthens the service life of your application. iglidur® bar stock products are available as round rods, tubes or plates of different lengths. Upon request, they can be machined if special shapes are needed. Depending on the application, different iglidur® materials with specific properties can be selected. For example, there are iglidur® plastic bar stock products that withstand temperatures up to +250 °C or have been certified for food and drinking-water applications.
iglidur® J, round bar
- Low wear against different shaft materials
- Excellent wear resistance at room temperature
- Very good wear resistance at medium temperatures
- Low coefficient of friction during dry operation
- Vibration-dampening
- Good chemical resistance
- For best performance with soft shaft materials
- Resistant to dirt and dust
- Low moisture absorption
iglidur® A350, round bar
- For use with temperatures up to +180°C
- Comply with FDA requirements
- For medium to high loads
- Equally good for both rotating and pivoting applications
- Lubrication-free and maintenance-free
- Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
iglidur® X, round bar
- Continuous operating temperatures from -100 to +250°C
- Extremely high chemical resistance
- Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
- Excellent wear resistance under water
- High compressive strength
- Mould resistant according to DIN EN ISO 846
iglidur® J, bar stock plates
- Low wear with different shaft materials
- Low coefficient of friction during dry operation
- Vibration-dampening
- Good chemical resistance
- For best performance with soft shaft materials
- Low moisture absorption
iglidur® A350, bar stock plates
- For use with temperatures up to +180°C
- Comply with FDA requirements
- For medium to high loads
- Equally good for both rotating and pivoting applications
- Lubrication-free and maintenance-free
- Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
iglidur® X, plate strips
- Continuous operating temperatures from -100 to +250°C
- Extremely high chemical resistance
- Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
- High compressive strength
- Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® JB, plate strips
- Low wear
- Low coefficient of friction
- Low moisture absorption
- Good media resistance
New
REC200, bar stock plate
- high hardness and rigidity
- high toughness (down to -40 °C)
- high heat resistance
- low water absorption
- high dimensional stability
- good electrical insulating behaviour
- good sliding properties
- high resistance to solvents
iglidur® E7, round bar
- Low coefficient of friction
- Self-lubricating due to incorporated solid lubricants
- Corrosion-resistant
- Choose the standard length of 1,000 mm or have a length cut to size from 100- 900 mm
iglidur® W300, plate strips
- For especially long service life
- Low coefficient of friction
- Extremely wear-resistant
- Resistant to dirt
- Resistant to edge pressure
- Resistant to shocks and impacts
- Resistant to dirt and dust
iglidur® J200, round bar
- Very long service life with hard anodised aluminium
- Low coefficient of friction
- Wear-resistant
- For low to medium loads
- Lubrication and maintenance-free
- High media resistance
- Resistant to edge pressure
- Resistant to shocks and impacts
iglidur® RW370 plate strips
- Complies with the fire protection standard DIN EN 45545 HL3, R22/R23
- Flame retardant
- High wear resistance
- Low coefficient of friction
- Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® A180, bar stock sheets
- Complies with Food and Drug Administration (FDA) regulations for contact with food
- Good media-resistance
- For wet environments
- High wear resistance
- Resistant to edge pressure
- Resistant to shocks and impacts
- Resistant to dirt and dust
iglidur® A180, round bar
- Complies with Food and Drug Administration (FDA) regulations for contact with food
- Good media-resistance
- For wet environments
- High wear resistance
- Resistant to edge pressure
- Resistant to shocks and impacts
- Resistant to dirt and dust
