Low Cost Automation
The robolink® modular robotic system allows you to automate manual work steps quickly and easily. Articulated arms in various lengths and sizes are available. The number of lubrication-free joints used ranges from two to six, and the robot can be equipped with various tools (e.g., grippers, suction cup, camera, etc.) as desired. robolink® robot components are characterised by their modularity. As a modular system, a robot arm can be configured as desired and therefore economically, and moreover it is also possible to obtain ready-to-use complete systems.
Apiro room gantry
Product information
- Payload up to 1.5 kg
- Working area up to 625 x 625 x 625 mm
- Degrees of freedom: 3
- Speed: up to 0.1 m/s
- Repeat accuracy ± 0.5 mm
- Min. service life: 500 thousand cycles
- Lighter than conventional igus gantry robots
- Other sizes on request
- Energy chains (not included in the scope of delivery)
Upon request
To the product page
igus Robot Control (iRC) software for gantries & delta robots
Product information
You can find all relevant documents in the downloads below.
TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software
- Diverse automation tasks with simple programming software
- For gantries and delta robots
- Easy software installation for Windows 10
- Use with a PC or tablet
- Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhoff
- 10m cable length
You can find all relevant documents in the downloads below.
TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software
Upon request
To the product page
3-axis Delta robot | Working diameter 360 mm
Product information
Optionally available
- Up to 60 picks/min.
- For loads up to 5 kg
- For precision requirements of 0.5 mm
- At speeds up to max. 3.0 m/s
- Max. acceleration: 60 m/s²
Optionally available
- Proximity switches incl. Mounting bracket
- Various Control systems
- Cable set 3, 5 & 10 m
- e-chain set for 3-axis Delta - 360 mm
Upon request
To the product page
Robot cell for all igus robots - Size: Medium
Product information
- Suitable for igus® jointed arm, SCARA, Delta and gantry robots
- Dimensions: 1,000 x 880 x 2,030 mm
- Robot frame made of aluminium profiles
- One module, 50 robot types and an infinite number of possible applications
- With emergency stop, start and stop display and CE documentation
- Robot and control cabinet are installed by igus
- Energy chains not included in the price
Upon request
To the product page
SCARA robot 4 DOF with cladding | size M | 560 mm working space
Product information
Optionally available
- Payload: 2 kg
- Range: 560 mm
- Reach along the Z-axis: 500 mm
- Degrees of freedom: 4
- Speed: 20 picks/minute
- Minimum service life: 2.5 million cycles
- IP Protection Class IP45, splash-proof
Optionally available
Upon request
To the product page
ReBeL cobot 6 DOF
Product information
- Number of axes: 6
- Load capacity (max.): 2 kg
- Repeatability: ±1mm
- Reach: max. 664 mm
- Nominal reach: 400 mm
- Dynamics with 500 g load capacity: min. 7 picks/min
- Net weight: 8.2 kg
- Possible area of application: service robotics, cobot functions preparation
- Control system: plug and play
Upon request
To the product page
2-axis delta robot | Workspace 400 mm
Product information
Optionally available
- Up to 60 picks/min.
- Load capacity 5 kg
- For precision requirements of +/- 0.5 mm
- At speeds up to max. 2.0 m/s
- Max. acceleration: 30 m/s²
Optionally available
- Proximity switches incl. Mounting bracket
- Various Control systems
- Cable set in 3, 5 & 10 m
- e-chain set for 2-axis Delta - 400 mm
Upon request
To the product page
Individual linear robots with any stroke length
You can request an individual drylin® E linear robot created according to your application parameters here.
Upon request
To the product page
New
iggy Rob: humanoid robot
Product information
- Humanoid robot
- Weight 101 kg
- Maximum component weight 1.5 kg
- AMR base: ReBeLMove Pro 2
- Arms: 2 x ReBeL-6DOF-03
- 1x suction gripper with CobotPump, 1x ReBeL gripper
Upon request
To the product page
2-axis delta robot | Workspace 700 mm
Product information
Optionally available
- Up to 50 picks/min.
- Load capacity 5 kg
- For precision requirements of 0.5 mm
- At speeds up to max. 2.0 m/s
- Max. acceleration: 30 m/s²
Optionally available
- Proximity switches incl. Mounting bracket
- Various Control systems
- Cable set in 3, 5 & 10 m
- e-chain set for 2-axis Delta - 700 mm
Upon request
To the product page
Robot cable set for 2-axis kinematics
Product information
Set consisting of:
For single axes, line, area & 2-axis delta robots
Suitable for igus Robot Control and Dryve D1
Set consisting of:
- 2x motor cable, straight plug
- 2x encoder cable, straight plug
- 2x iniators NC (normally closed) PNP
- 2x iniators, straight connector
For single axes, line, area & 2-axis delta robots
Suitable for igus Robot Control and Dryve D1
Robot cell for all igus robots - Size: Large
Product information
- Suitable for igus® jointed arm, SCARA, Delta and gantry robots
- Dimensions: 880 x 1.580 x 2.030 mm
- Robot frame made of aluminium profiles
- One module, 50 robot types and an infinite number of possible applications
- With emergency stop, start and stop display and CE documentation
- Robot and control cabinet are installed by igus
- Energy chains not included in the price
Upon request
To the product page
7th axis configurator
Expand the working space of your robot.
- Complete solution from € 2,248.09
- Up to four times larger robot workspace
- CE conform system
- Save on construction work with suitable adapter kits
- Fast control via digital I/Os
Upon request
To the product page
Flat linear robot | DLE-FG-0001 | Workspace 300 x 300 mm
Product information
Optionally available
- Payload up to 8.0 kg
- Working area 300 x 300 mm
- Degrees of freedom: 2
- Speed: up to 0.5 m/s
- Repeatability ± 0.5 mm
Optionally available
Upon request
4 items, thereof ready for shipping:
1 in 24 hours
1 in 10 working days
To the product page
ReBeL Cobot 5 DOF
Product information
- Number of axes: 5
- Load capacity (max.): 2.5 kg
- Repeatability: ±1 mm
- Reach: max. 617 mm
- Nominal reach: 400 mm
- Dynamics with 500 g load capacity: min. 7 picks/min
- Net weight: 7.2 kg
- Possible area of application: service robotics, cobot functions preparation
- Control system: plug and play
Upon request
To the product page