Ships within 24 hours Service Life calculation CAD Direct Download
myigus
Shopping Cart
(0)
My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.
See all contacts
INT(EN)
Menu
  1. Home
  2. Joint bearings
  3. Angled / in-line ball and socket joints

Angled / in-line ball and socket joints

igubal® thrust bearings are corrosion-resistant, resistant to chemicals, dust and dirt, UV radiation and nuclear radiation. In addition, they are temperature resistant between -30 and +80 °C. The thrust bearings with a space-saving design consist of two components: an impact resistant and rigid ball pan and spherical washer that glides loosely in the pan, held by the shaft lying on it. The bearings are available in sizes from 5 to 20 mm. Upon request, igus® will manufacture special components with different dimensions.

Expert for spherical bearings

Expert for spherical bearings

Enter just a few items of information to calculate the expected service life of igubal® spherical bearings.
List
Tile

Number of products: 19

Angled ball and socket joint. WGRM, igubal®
Angled ball and socket joint. WGRM, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust
3.57 USD/Pc.
4 items, thereof ready for shipping:
3 in 72 hours
To the product page

Angled ball and socket joint, WGLM, igubal®
Angled ball and socket joint, WGLM, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust
3.57 USD/Pc.
4 items, thereof ready for shipping:
3 in 72 hours
To the product page

Angled ball and socket joint, WGRM, with steel pins, igubal®
Angled ball and socket joint, WGRM, with steel pins, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Material of ball cap: iglidur® W300
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Vibration dampening
  • Insensitive to dirt and dust
Upon request
4 items, thereof ready for shipping:
3 in 72 hours
To the product page

Angled ball and socket joint, WGRM LC, low cost, igubal®
Angled ball and socket joint, WGRM LC, low cost, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust
3.07 USD/Pc.
4 items, thereof ready for shipping:
3 in 72 hours
To the product page

Angled ball and socket joint, WGLM LC, low cost, igubal®
Angled ball and socket joint, WGLM LC, low cost, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust
4.16 USD/Pc.
4 items, thereof ready for shipping:
3 in 72 hours
To the product page

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust
3.07 USD/Pc.
5 items, thereof ready for shipping:
4 in 72 hours
To the product page

Angled ball and socket joint, WGRM DE, removable, igubal®
Angled ball and socket joint, WGRM DE, removable, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made out of plastic or metal
  • Connection for rotating and pivoting movements
  • lightweight
  • Easy assembly (75N) and disassembly
  • Insensitive to dirt and dust
5.39 USD/Pc.
8 items, thereof ready for shipping:
1 in 24 hours
7 in 72 hours
To the product page

In-line ball and socket joint, AGRM, igubal®
In-line ball and socket joint, AGRM, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening
3.86 USD/Pc.
2 items, thereof ready for shipping:
1 in 2 weeks
To the product page

In-line ball and socket joint, AGLM, igubal®
In-line ball and socket joint, AGLM, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening
3.86 USD/Pc.
1 items, thereof ready for shipping:
1 in 2 weeks
To the product page

In-line ball and socket joint, AGRM, with steel pin, igubal®
In-line ball and socket joint, AGRM, with steel pin, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Material of ball cap: iglidur® W300
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
  • High vibration-dampening
Upon request
1 items, thereof ready for shipping:
1 in 2 weeks
To the product page

in-line ball and socket joint, AGRM LC, low-cost, igubal®
in-line ball and socket joint, AGRM LC, low-cost, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Plastic ball studs
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
2.24 USD/Pc.
2 items, thereof ready for shipping:
2 in 72 hours
To the product page

In-line ball and socket joint, AGLM LC, low-cost igubal®
In-line ball and socket joint, AGLM LC, low-cost igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Plastic ball studs
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
7.21 USD/Pc.
2 items, thereof ready for shipping:
2 in 72 hours
To the product page

In-line ball and socket joint, AGRM LC, with steel pin, igubal®
In-line ball and socket joint, AGRM LC, with steel pin, igubal®
  • Thread direction: right hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • For all mechanical combinations
  • Very easy to assemble
  • Maintenance-free
  • Resistant to corrosion and chemicals
4.94 USD/Pc.
3 items, thereof ready for shipping:
1 in 24 hours
2 in 72 hours
To the product page

Angled ball and socket joint, WGLM DE, removable, igubal®
Angled ball and socket joint, WGLM DE, removable, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Ball studs optionally made of stainless steel or plastic
  • Connection for rotating and pivoting movements
  • lightweight
  • Easy assembly (75N) and disassembly
  • Insensitive to dirt and dust
7.39 USD/Pc.
8 items, thereof ready for shipping:
4 in 72 hours
To the product page

Angled ball and socket joint, WGLM LC MS, low cost, igubal®
Angled ball and socket joint, WGLM LC MS, low cost, igubal®
  • Thread direction: left-hand
  • Housing material: igumid G
  • Ball stud made from galvanised steel
  • Connection for rotating and pivoting movements
  • Lightweight
  • Easy and quick assembly
  • Insensitive to dirt and dust
Upon request
4 items, thereof ready for shipping:
3 in 72 hours
To the product page

Consulting

Photo
Thomas Preißner

+49 2203 9649 115
Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h

The terms "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" and "yes" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries. This is a non-exhaustive list of trademarks (e.g. pending trademark applications or registered trademarks) of igus GmbH or affiliated companies of igus in Germany, the European Union, the USA and/or other countries or jurisdictions.

igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention on this website. The products offered by igus® are those of igus® GmbH